Replacement Graphics - Premium Adfresco Cafe Barriers

This Premium Adfresco Café Barrier is the ideal branding and functional solution for outdoor dining areas in windy environments, blending aesthetic appeal with practical durability.

All the components of this system are weatherproof and designed for outdoor use, though we recommend bringing them in overnight.

This product is a replacement printed banner for the Premium Adfresco Café Barrier system, so they feature a pole pocket at both the top and bottom. Available in 3 sizes (1200mm, 1500mm or 1800mm) which can purchased with or without cross rails.

Material Options

• PVC - Fire rated wipe clean material which can be printed either single-sided (440gsm material) in which case the rear of the banner will be white or it can be printed on both sides (750gsm blockout material - used to stop any show-through and ensure your graphics are crisp and clear).

• Mesh PVC - Fire rated 370gsm material which is similar to normal PVC but with hundreds of tiny perforations to reduce the wind resistance making it an ideal choice for more exposed areas. Only available as single-sided prints and comes with a white reverse.

• Polyester Canvas - Fire rated polyester-based fabric material that looks and performs like traditional canvas but is far more durable and less likely to rot. Ideal if you're after a more traditional look and feel to your cafe barrier. Excellent for indoor and outdoor use, but not as easy to keep clean as the standard PVC. This material can be either single (250gsm single layer with white reverse) or double-sided (3 layers totalling 790gsm - front, back and blockout interlining).

Width Options

Available in 3 width options - 1200mm, 1500mm, and 1800mm. Please note the widths are the cross rail sizes, which are measured from post centre to post centre (see image above). Actual banner sizes are smaller than these measurements and are outlined below:

• 1200mm - 1005mm (w) x 838mm (h)

• 1500mm - 1305mm (w) x 838mm (h)

• 1800mm - 1605mm (w) x 838mm (h)