Euro Chieftain Lamp Column Banner System - EN40 Compliant

Product Code: EC-LPB

Euro Chieftain Lamp Column Banner System - EN40 Compliant

As low as £138.00 £115.00

The Euro Chieftain Banner system complies fully with the all-important Government Regulation EN40, which dictates the maximum wind load that any type of signage is allowed to exert onto a standard street lighting column. This compliance makes the lamp post banner system ideal for local authorities and county councils.

Available as hardware only or with heavyweight 710gsm PVC graphics with double-sided print in a range of sizes. Custom sizes are also available, please contact us directly for a quote.

Please note: The T-Bar hand installation tool is required when using fixing kits supplied by Display Wizard due to the tamper proof fitting. This can be found under accessories and extras.

Product Code: EC-LPB

Information

The Euro Chieftain Lamp Column Banner System has full-compliance with the EN40 Government Regulation. This regulation dictates that all lighting columns must be capable of facilitating the wind loading that a single 0.3 square metre rigid road sign would exert.

This column banner system has been wind tunnel tested up to 100mph, making it suitable for almost any outdoor usage.

It can be installed onto lamp columns and flag poles from 76mm diameter and above, whilst it is compatible with straight, fluted or tapered columns.

The arms can be cut down to match any banner width required up to 800mm wide, whilst it can accommodate one or two banners per column.

The Euro Chieftan is suitable for outdoor advertising and profile-raising in a number of different locations. It is mainly used by local councils and other governmental organisations due to its high-quality design but it can also be used at charity events, roadside use, sporting shows, expos, high street promotion and much, much more.

The arms can easily be removed in between banner campaigns leaving brackets and banding in place on the column for next usage. The brackets are installed onto columns using 3 tamtorque stainless steel bands per bracket.

Can be wall mounted using pre-drilled holes within bracket.

Optional extras are the T-Bar Hand Installation Tool which is required if you are assembling it yourself, whilst two drill driver bits can also be added if you want to mount the system on a wall.

 

More Information
Print Material High Strength 710gsm Fire Rated Blockout PVC
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
You might also like: